Doc. No. 0012920 rev. E
Page 16 of 21
Prepare the faceplate
Left faceplate
Right faceplate
Amber wire 18 mm.
p/n 15130118
toSDA/H8
Blue wire 18 mm.
p/n 15130318
toSCL/H9
Green wire 18 mm.
p/n 15130218 toV-
BAT GND/H15
Green wire
13 mm. p/n
15130213
Left faceplate
Insulating disk p/n
13563-000:
Cut in half and place on
the side where the green
wires are soldered to
battery spring. To protect
when soldering. To be
removed after soldering.
Coat the solder points within
the red dotted line by using
Molycote. The coat must not
be added in the area behind
(indicated by the red arrow).
Red wire 18 mm.
p/n 15130018
toVBAT/H16
