Beltronics E936CS, Operating Instructions Manual

sample alerts) press 

cty 

or 

aud 

to move forward or backward

through the alerts. During 

sws

™ 

sample alerts press 

cty

to 

move forward in the 

sws

™ 

message list.“

MSG 1

” will  appear 

initially in the display confirming your selecion. Pressing the 

aud

button allows you to listen to the 

sws

™ 

message while 

viewing it in the display. Press the 

cty

button again to step to 

the next message; press the 

aud

button to review, and so on.

This allows you to review all 

60

messages.

To exit Tutorial Mode, press the 

p/v 

button and your unit

will be 

on

and ready to receive signals.

Memory Retention of Feature Selections

Any time 

express 936

is turned 

off

or unplugged from the

cigarette lighter socket, all feature settings are retained in the
unit’s memory. Memory retention eliminates the need to reset
your preferred feature settings each time your unit is turned

off

and then back 

on

.

Adjusting the Audio Level

Once your unit has completed the power up test sequence, the
audio level can be adjusted by holding the 

p/v 

button down.

As you hear the audio level change, the display will provide a
visual reference of the audio level. To reverse the direction in
which the audio level increases/decreases, briefly release, then
hold down the 

p/v 

button again.

drk 

(Dim/Dark) Button

The 

drk

button allows selection of a dim or dark setting for the

display. To engage dim mode, press the 

drk

button once.A single

“beep”coupled with the brief illumination of “

DIM

”on the display

confirms your selection. To completely cancel the illumination of
the display during an alert, press 

drk

a second time.A single

“beep”coupled with the brief illumination of “

DARK

”in the

display confirms your selection.While in dark mode, you will
notice an “

H

”(highway mode) or “

C

”(city mode) remains dim to

confirm your unit is receiving power. To return to a full bright
setting, press the 

drk

button a third time; two “beeps”confirm

this selection. Use of the 

drk

button does not affect audio alerts.

Important—if you press the the 

drk

button and do not receive

audible confirmation, the audio level has been set too low.



12893 Bel Express 936 Manual  4/26/01  2:30 PM  Page 6