Instaclear is a registered trademark of the Ford Motor Company.
ElectriClear is a registered Trademark of Libbey, Owens, Ford, and Delco-Remy.
Entering Selectable Features Mode
1
.
With the unit
, press and hold the
button then press
the
⁄
button. The amber X
will illuminate and a short
“beep” will sound.
2.
Immediately after the “beep”, digit
#
will appear and indicate
the status of the
sws
™
Selectable Feature. To select digit
#
(
-
Guard
®
), press the
button again. To select digit
#3
(
sws
™
Voice), press the
button a third time and to select digit
#4
(Digital Voice prompts for Radar/Laser/
-
Guard
®
) press the
button once again. Use the
button to select one of the
four digits.
3.
If the selected digit is
solid
, feature is
, but may be canceled
by pressing the
button. Two “beeps” and the flashing digit
will confirm feature is
.
4.
If the selected digit is
flashing
, the feature is
, but may be
activated by pressing the
button. A single “beep”and
solid
illumination will confirm the feature is
.
5.
Press the
p/v
button to retain your new settings for Selectable
Features. Two “beeps” will confirm that you have exited from
Selectable Features Mode and your unit will be
.
i ns ta l l at io n
General Guidelines
Do not mount your unit directly behind windshield wipers or
mirrored sunscreens which block Radar and Laser signals
and substantially reduce warning range. Unlike “after market”
mirrored sun-screens, regular tinted glass does not affect
Radar reception.
Radar signals are also reflected by the “heated windshields”
known as Instaclear
®
and ElectriClear
®
available as an option on
some vehicles. This type of windshield makes any dash, visor or
windshield mounted detector ineffective. (If in doubt, check with
an appropriate dealership to see if this applies to your vehicle.)
To achieve optimum performance, regardless of which
mounting position you choose, follow these basic steps:
12892 Bel Express 926/916 Man 4/26/01 2:44 PM Page 10
Summary of Contents for Express 916
Page 25: ... ...
