Important Notes
Beltronics RX45 Comes Complete
Read This First
Please read both sides of these
instructions before starting your
installation.
For the easiest trouble-free
installation, install the Interface
first, and wire it to a 12-volt
switched circuit.
Then before installing the other
components, plug all of them into
the Interface and power up the
unit to confirm proper operation.
To get the best possible
performance, installation of the
Radar/Laser receiver is critical.
Although radar signals will pass
through some materials, including
plastic, laser signals will not. For
this reason the receiver must have
a clear view of the road in order to
work properly.
Performance
Warning
1
Installation of this system
requires some experience and
expertise in automotive
electronics. Car Audio specialists
and many new car dealers can
install this for you.
2
If you choose to install it
yourself without expertise in
automotive electronics, please
note that it can cause personal
injury or damage to your vehicle.
3
If your vehicle is damaged
during installation, its safety
systems may be compromised and
could cause personal injury or
property damage.
4
Improper installation may also
void RX45’s warranty.
12-volt installation
experience is
suggested
Front Radar/Laser Receiver
• Miniature weather-proof Radar/Laser
Receiver
• Universal mounting bracket with
stainless steel hardware
• Built-in 16 foot shielded cable with
water proof connector
• 12 nylon wire ties to secure cable
Miniature Display Controller
• Display Controller mounts easily to
instrument pod, dashboard or console
• Optional hidden display included
Interface
• Central module connects to switched
12-volt power and ground
• All components plug directly in using
modular connections
• 3M connector taps into existing
vehicle wiring
Documentation
• Comprehensive Owner’s Manual
• Installation Manual
Built-in Diagnostics
• Confirms all components are
operational
• Fully compatible with Laser Shifters
Beltronics
5442 West Chester Road
West Chester OH 45069
Service 800.341.2288
www.beltronics.com
©2010 Beltronics. Beltronics, RX45, SmartShield, AutoScan, ThreatDisplay and TechDisplay are trademarks of Beltronics USA, Inc. SWS is a trademark of SWS, L.C.
Manufactured and Printed in Canada. Features, specifications and prices subject to change without notice.
NOTE: INSTALL THE RECEIVER
HORIZONTALLY AND LEVEL,
WITH A CLEAR VIEW OF THE
ROAD.
R
A
D
A
R
•
L
A
S
E
R
•
S
A
F
E
T
Y
•
D
E
T
E
C
T
O
R
Ins
tall
atio
n M
anu
al
Q
U
I
C
K
-
I
N
S
T
A
L
L
E
D
P
R
O
T
E
C
T
I
O
N
