77
MANUAL DO USUÁRIO DC-2000 / PROGRAMA WINTASKGEN - Revisão 1.5
2.3 Connecting Data Collector
To connect a data collector:
1. Check “Define comport long parameters” checkbox on top if necessary. Extra
options appear as shown below when you check this option.
2. Select the options from the dropdown menu. When you define
communication protocols, you must set the same value with the device.
•
COM options: Select the COM port the device is connected to.
•
Baudrate options: 4800,9600,19200,38400,57600,115200.
•
Parity options: Even, Mark, None, Odd, Space.
•
DataBits options: 8,7.
•
StopBits options: None, One, OnePointFive, Two.
3. After the parameters are set, the device is automatically detected.
2.4 Setting up the Device
To setup the device:
1. Select the “Remote Settings” tab on the Main Menu. Click the “Device
Settings“ to obtain the device status.
