30
31
MAINTENANCE (CONT.)
BEFORE CALLING FOR SERVICE
•
Refer to the trial operation method to
use this appliance again.
Prevent Freezing
1.
Make sure the power cord is plugged in properly.
2.
Set the temperature of water to low or middle.
(Freezing can be prevented by thermal efficiency of the water tank.)
If there is no heating system in the toilet, wrap pipes with cloth
or other materials.
3.
If you are not using the unit for a long time in the winter, unplug and
drain the water from the water tank and pipes thoroughly.
Refer to the water drain method.
5. Screw the Drain Bolt and Install the Appliance
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
Completely
fails to work
Is there a power outage?
Is the power cord unplugged?
Are you sitting on the
seat correctly?
•
Check for the power cord
failure or a tripped breaker.
•
Plug the power cord
in properly.
•
Sit on the seat completely.
Water does
not spray
Is the water shutoff
valve closed?
Is the strainer clogged?
Are the nozzles clogged?
Is the water purifying
filter clogged?
•
Check for any water
leaking or dripping.
•
Clean the strainer.
•
Clean the nozzles.
•
Change the water
purifying filter.
Water is
leaking or
dripping
Are all the hoses tightened
up properly?
•
If water is still leaking
or dripping, contact to
your dealer.
Seat, water,
or air is
not warm
enough
Is the temperature set to OFF?
Is the appliance used in
Eco mode during the cold
weather?
•
Reset the temperature.
•
Press “eco” again to
release the function.
Summary of Contents for bio Bidet A8
Page 1: ...OWNER S MANUAL A8 ...
