BEMIS bioBedet BB1000, Owner'S Manual

12

13

•

Remove existing supply hose 
connected to the toilet tank. Make 
sure not to damage the water 
supply hose. 

•

Install the T-valve at the thread 
from the tank.

•

Remove the existing supply hose 
from the toilet tank

•

If your shut off valve is 1/2” size, 
use supplied 1/2” conversion nut 
as shown. 

3.  Connect the T-valve.

4.  Connect the water  

supply hose to the 

assembled T-valve.

Water supply hose 

1/2"conversion nut

INSTALLATION (CONT.)

•

Place the plate and guides over 
each mounting hole. Insert the 
mounting bolts through the plate 
and mounting holes. 

•

Slide cone packing and  
washers onto the bolts  
then fasten to securely  
mount bidet seat to toilet. 

5.  Installation Catch Plate.

6.  Bolt and Nut Assembly.

•

Slide this product onto the catch 
plate centering the unit with the 
guide arrows on the base. 

•

You will hear a click once this 
product is securely mounted to 
the catch plate. 

•

This product will feel a little loose 
on the toilet bowl. Adjust the fit 
from front to back and side to 
side for balance.

•

Tighten the nuts on both  
bolts securely.

•

Customers should use the  
new hose set provided with  
the product. Do not use used  
set again. 

7.  Assembly.

8.  Bidet Hose Assembly.