10
11
INSTALLATION
1. Remove the existing
toilet seat by locating the
bolts and nuts, typically
under a plastic cover, and
removing them first.
2. Close the water supply
valve and flush the toilet
completely so that there
is little to no water left in
the toilet tank.
3. Disconnect the water
hose from underneath
the toilet tank.
4. Connect the 7/8” T-Valve
to the toilet fill valve
where you just removed
the water hose from.
Make sure the rubber
washer is properly seated
with the narrow side up.
5. Attach the water supply
hose that comes from
the water shut off to the
bottom of the T-Valve.
6. Connect the 25.5” metal
hose we supplied
to the open side of
the T-Valve.
7. To install the hot water
line, close the water
supply valves underneath
your sink.
8. Disconnect the water
hose from your sink’s
hot water supply valve.
Summary of Contents for BioBidet BB-270
Page 1: ...User Manual BB 270 ...