26
27
OPERATION (CONT.)
13. Sitz Bath
14. Seat Sensor Bypass
•
Wash or Bidet is switched to
Wash Sitz Bath or Bidet Sitz
Bath if Nozzle Cleaning button is
pressed during use.
•
Water pressure is switched to 1st
level regardless of preset water
pressure settings and Sitz Bath
operates for 5 minutes.
•
LED of Nozzle Cleansing turns on
during the operation of Sitz Bath.
•
Select the Nozzle Cleaning
again to switch to normal
Wash or Bidet.
•
The seat sensor can be activated
and deactivated by pressing
Massage button for 3 seconds.
•
If the seat sensor is deactivated,
the unit works without occupying
the seat and select features*
cannot be controlled.
*Features: Night Light, Silent
mode, Nozzle cleaning.
15. Reset
16. User Preset
•
Press and hold the Stop
button on the auxiliary panel
for 5 seconds.
•
After 3 seconds, the seat
will power off. Keep
holding another 2 seconds
and the seat will power
back on. This completes the
factory reset process.
•
Nozzle position, water pressure,
dry/water/seat temperature can
be preset and stored for 2
different users.
How to preset
1. Adjust nozzle, position,
water pressure,
dry/water/seat
temperature to
your preference.
2. Preset 1: Press Stop
button and “ ”
simultaneously for
3 seconds.
Preset 2: Press stop
button and “ ”
simultaneously for
3 seconds.
3. Press “Stop”
button or just
wait to complete.
Using the Preset Features
1. Press selected preset button
2. Preset nozzle position, water
pressure and temperatures will
be activated.