SpA
BL 30 / 35
7
MAINTENANCE
•
For the normal maintenance (oil, filter, spark plug) check the booklet for the engine included.
•
The chain for the final transmission is lubricated with normal grease.
Every year you should introduce some grease through the hole “Q” (PICT 19) in
the main body.
•
All the joints, cables and the belt stretcher should be greased from time to time.
•
Keep the machine and the tillers clean and check that all the screws and nuts are well tied, especially the
screws of the tiller (always wear protection gloves working on the tiller).
•
In case of breaking or wear you can replace the belt after taking off the side protection cover fixed to the frame
near the engine shaft by two screws (PICT 12-13-14-15).
•
After replacing the belt adjust it to the correct tension following the instructions in the chapter USE AND
ADJUSTMENT.
•
The pin fixing the big pulley has also a safety purpose: in case heavy obstacle it will break avoiding damages to
other parts of the machine.
•
The replacement of the pin is very easy : you have to insert the new pin in the hole using a hammer.
•
For any technical repair especially during the guarantee period, it is recommandable to apply to the specialized
workshops of our dealers.
CAUTION
It is advised not to keep the motor running when the machine is not
being used for its specific purpose
-PICT n°19-
WARRANTY
Our machines and accessories are guaranteed for 12 months excluding electric and rubber parts.
All the defective parts will be replaced free of charge excluding cost of labour and transport freight, which would be
at customer’s charge.
For any problem regarding the engine or any other part not of our production, please refer to the guarantee
conditions stated by the manufacturer and apply to their assistance centres.
For any kind of problem or repair please apply to the dealer where you bought the machine.
