Important information
6
RFID113_D00303_00_M_XXEN/05.2018
1.3
Delivery conditions
Bender sale and delivery conditions apply. These can be obtained from Bend-
er in printed or electronic format.
1.4
Inspection, transport and storage
Inspect the dispatch and equipment packaging for damage, and compare the
contents of the package with the delivery documents. In the event of damage
in transit, please contact Bender immediately. The devices must only be
stored in areas where they are protected from dust, damp, and spray and drip-
ping water, and in which the specified storage temperatures can be ensured.
1.5
Disposal
Abide by the national regulations and laws governing the disposal of this de-
vice. Ask your supplier if you are not sure how to dispose of the old equip-
ment. For more information on the disposal of Bender devices, refer to our
homepage at www.bender.de -> Service & support.
1.6
Intended use
This manual provides a description of an RFID module which can only be used
in combination with the ICC1612 charge controller. The charge controller is
designed for use in electric vehicle (EV) charging stations, wall boxes and
street light charging points. This document should be used together with the
ICC1612 charge controller operating manual, and the AN119 and LEDM100
module operating manuals, all of which can be downloaded from:
www.bender.de/manuals
The RFID module is a separate PCB which facilitates user interaction with the
charging system and is designed according to ISO14443A/MIFARE. It can be
connected to the charge controller, the main component of a charging sys-
tem, using a standard
RJ45 cable
.
