Operation and configuration
22
4.5.4 Changing the company name
The company name must consist of no more than 20 characters. It is printed as a header on the test
report.
4.5.5 Time/date
Proceed as follows to set the time and date:
The UNIMET
®
300ST clock is powered by a battery with a service life of approximately four years (see
also chapter "6.2 Changing the battery").
Device setting
1.Select “Change comp. name”
ENTER COMPANY NAME:
MEIER GMBH&CO.KG
Char.: A-Z, 0-9, &-. /
Exit: ESC Next:
2. Use the arrow keys to change the first
characters and then press the ENTER key
4. After entering the last character or
holding down ENTER key for
approx. 3 seconds, the entry is saved
and the settings menu exited.
3. Select all the remaining characters also
Briefly press the ESC key
= edit previous characters
Press and hold down the ESC key
= Exit menu without making changes
The new company name is saved.
2. Test probe calibr.
3. Device type query
4. Warm-up/cool-down
5. Change comp. name
ESC
Device setting
1. Select “Time/date”
ESC
2. Select “Time”
3. Use the arrow keys to select hours and
then confirm with the ENTER key
4.Use the arrow keys to select minutes and
then confirm with the ENTER key
5. Set the “Date” in the same way
1. Exit
2. Time: 14: 49
3. Date: 30. 09. 11
(Summer time/CEST)
1. Exit
2. Time: 14: 49
3. Date: 30. 09. 11
(Summer time/CEST)
ESC
3. Device type query
4. Warm-up/cool-down
5. Change comp. name
6. Time/date
Summary of Contents for UNIMET 300ST
Page 50: ...Testing and measuring 50 TGH1365en 10 2012...
Page 58: ...Data 58 TGH1365en 10 2012...
Page 61: ......
