89000109-002
xVue Touch Installation Manual
Rev 2
Page 6-24
© Honeywell International Inc. Do not copy without express permission of Honeywell.
For Use in Non-Certified Aircraft
The xVue Touch System supports the following navigation sources:
The KSD 100EXP has two ARINC 429 receive channels reserved for GPS Navigators data and two ARINC
429 receive channels reserved for Digital VHF Navigators (4 A429 Rx channels in total). The KSD 100EXP
has reserved a single ARINC 429 transmit channel for communication with up to two GPS Navigators, this
is known as the EFIS Control channel.
The KSD 100EXP configuration can be defined with up to two GPS Navigators, two digital VHF Navigator
radios, and one analog/legacy VHF Navigator radio. A GPS Navigator and VHF Navigator may be
integrated in a single unit.
In addition to the ARINC 429 data, the KSD 100EXP supports processing of the Geometric Altitude
parameter from GPS Navigator via RS-232 Serial interface. Geometric altitude is required for correct
operation of Synthetic Vision, relative terrain on the moving map, and relative terrain in the Vertical
Table 6-1 Supported Navigation Sources
Manufacturer
Model
BendixKing
KSN 770
KSN 765
Garmin
GNC 420W
GNS 430W
GNS 530W
GPS 400W
GPS 500W
GTN 625
GTN 635
GTN 650
GTN 725
GTN 750
Avidyne
IFD 410
IFD 440
IFD 510
IFD 540
IFD 545
IFD 550
NOTE
THE KSD 100 TRANSMIT CHANNEL, WHICH IS RESERVED FOR COMMUNICATION WITH
NAVIGATORS, MAY BE CONNECTED TO MULTIPLE RECEIVERS WHICH PROCESS THE
OUTPUT DATA.
