89000109-002
xVue Touch Installation Manual
Rev 2
Page 1-3
© Honeywell International Inc. Do not copy without express permission of Honeywell.
For Use in Non-Certified Aircraft
1.3 Acronyms and Abbreviations
(1) The abbreviations are used in agreement with ASME Y14.38.
(2) Acronyms and non-standard abbreviations used in this publication are as follows in Table 1-3.
IEEE 315/ANSI Y32.2
Graphic Symbols for Electrical and Electronics Diagrams (available from the
American National Standards Institute at http://www.ansi.org)
IEEE 802.3
Ethernet Standards
MIL-C-17
Military Specification: Cables, Radio Frequency, Flexible and Semi-rigid
MIL-DTL-5541
Military Specification, Chemical Conversion Coatings on Aluminum and
Aluminum Alloys
MIL-DTL-27500
Detail Specification: Cable, Power, Electrical and Cable Special Purpose,
Electrical Shielded and Unshielded
MIL-HDBK-263
Electrostatic Discharge Control Handbook for Protection of Electrical and
Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated
Explosive Devices) (Metric) (available from any military standards database)
MIL-STD-1686
Electrostatic Discharge Control Program for Protection of Electrical and
Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated
Explosive Devices) (Metric) (available from any military standards database).
RS-232/ ANSI TIA-232
Recommended Standard - Serial Interface
RS-422/ ANSI TIA-422
Recommended Standard - Electrical Characteristics of Balanced Voltage
Differential Interface Circuits
Table 1-3 Acronyms and Abbreviations
Acronyms and
Abbreviations
Definition
#
Number
A
Amp
AC
Advisory Circular
A/C
Aircraft
ADAHRS
Air Data and Attitude Heading Reference System
ADS-B
Automatic Dependent Surveillance
AFCS
Automatic Flight Control System
AFM
Airplane Flight Manual
AHRS
Attitude and Heading Reference System
AI
Attitude Indicator
ALT
Altitude
Table 1-2 Standard References
Document Number
Description
