Rev C, March 30, 2018
8
Manual Number 9019050
general requirements in Section 3 are not addressed by the MD32 since the MD302 provides
the indication/display and user interface portion of the system.
The conditions for TSO approval include the following granted deviations:
RTCA/DO-160G was used in lieu of RTCA/DO-160E for environmental qualification
RTCA/DO-178C was used in lieu of RTCA/DO-178B for software qualification
2.5 MODIFICATIONS
Each model MD32 (part number 6420032-( )) has a nameplate that identifies the manufacturer,
part number, description, certifications and technical specifications of the unit. It also includes
the “MOD” or modification number representing notable changes in the hardware design of the
unit. Software revisions are reflected in the software version displayed on the MD302 Review
Configuration screen. The following are descriptions of the current modification releases of the
MD32 Remote Magnetometer.
MOD 0
Modification (MOD) 0 is identified on the nameplate by the lack of marking on the MOD
numbers shown as blocks 1 through 9 (i.e. 1-9 are visible).
Mod 0 is the initial release of the MD32 Remote Magnetometer.
