Quatra™ Full-Rise Scissor Lift
46
P/N 5900085 — Rev. A1 — October 2019
Raising a Vehicle
This section describes how to position a Vehicle on the Platforms and raise it.
To raise a Vehicle
:
1.
Make sure the Platforms are on the ground. If they are not, move them to the ground.
2.
Drive the Vehicle onto the Platforms.
When driving a Vehicle onto or off the Platforms, try to keep the wheels in the middle of the
Platforms.
Put the Vehicle in park, put on the parking brake, and turn off the engine.
If the Vehicle is a manual transmission, put it into first gear before turning it off. You do not want
the Vehicle moving while it is raised on the Lift.
3.
Get out of the Vehicle and make sure the wheels are securely on the Platforms.
If any part of the wheel is not securely on the Platform, carefully drive the Vehicle back off the Lift
and then drive it back on, making sure to keep the wheels in the middle of the Platforms.
4.
Walk completely around the Vehicle and make sure there are no obstructions or any other issues
that will interfere with the raising of the Lift. If there are, fix them before raising the Vehicle.
5.
At the Console, press and hold the
Raise
button.
⚠
WARNING
Do
not
make any adjustments to the Valve Block with a Vehicle raised on the
Platforms; the Frames may become uneven and a Vehicle could fall off, resulting in
property damage or serious injury to anyone nearby.
If the Lift becomes unstable or the Vehicle begins moving, release the
Raise
button immediately
and carefully lower the Lift back down to the ground.
6.
When the Platforms reach the desired height, go up a little bit more, then release the
Raise
button.
7.
Press the
Lower
button briefly to move the Lift down onto the most recently passed Safety Lock
and make sure that all Safety Teeth on the Top Safety Arm are engaged.
⚠
WARNING
Only leave your Lift either engaged on a Safety Lock or fully lowered.
8.
With the Platforms securely on a locking position, check around the Vehicle to make sure
everything looks good.
If you see anything wrong, fix it before anyone gets near the Platforms.
Summary of Contents for Quatra XR-12000L
