RJW Series of Rolling Jacks
18
P/N 5900093 — Rev. B — October 2020
11.
Find the Safety Brackets that came with the Rolling Jack.
12.
Remove the Nyloc Nuts at the top of the Bolt Threads coming up from the top of the Roller.
13.
Put a Safety Bracket into place on the Bolt Threads—the Safety Bracket goes on the Rolling Jack
side, not the Utility Rail side (see drawing below).
Not necessarily to scale. Not all components shown. Side view. Shows a Roller without a Safety
Bracket on the left and a Roller with a Safety Bracket on the right.
You must
install a Safety
Bracket around each Roller.
⚠
WARNING
You are
required
to install a Safety Bracket around each of the four Rollers of the
Rolling Jack. They ensure the Jack stays in place on the Utility Rails. If you do not
install the Safety Brackets, there is a possibility the Rolling Jack could fall off the Lift,
causing damage or injury.
14.
Securely tighten the Nyloc Nuts to hold the Safety Bracket in place.
15.
Install the Safety Brackets on the other three Rollers of the Rolling Jack.
16.
If you are installing
two
Jacks on the Lift: put the second Jack into place, securely tighten all four
Adjustment Bolts, and then install all four Safety Brackets.
17.
Raise the Lift (so that the Rolling Jack is off the ground) and engage the Lift on a Safety Lock.
If you engaged the Lift on a Safety Lock in Step 1, you can ignore this step.
⚠
WARNING
Do not start using the Rolling Jack until you are certain the four-post Lift is engaged
on its Safety Locks. If the four-post Lift is not engaged on its Safety Locks, it could
move, impacting the stability of the Vehicle on the Rolling Jack, possibly causing it
to fall off, and possibly causing damage or injury.
18.
Check the clearance around, and movement of, the Rolling Jack.
Make sure the Rollers are centered in the Utility Rail Channel or on the Utility Rail Lip at all points
along the usable portion of the Utility Rail.
19.
If necessary, make adjustments to ensure proper operation.
Do not use your Rolling Jack unless it is safe to do so!
Summary of Contents for RJ45LP
