Page3of19
Notes
Do not make the products under great impact or stay away
from strong electromagnetic interference and vibration.
There are some sophisticated parts inside the camera,
therefore, during transportation and installation, please avoid the
damage cause by stress or severe vibration. For the sake of safety,
please do not switch on power before accomplishing all
installation.
Please comply with all electrical safety standards during
operation, camera or signal transmission cable should maintain a
sufficient distance (50 meters) with high-voltage equipment or
cables, if necessary, lighting and thunder protective measures must
be taken.
Please install the camera in well-ventilated environment.
Please do not make the camera face sunshine or other strong
light directly in case of any damage to the lens and the sensor.
The temperature and humidity range for cameras work are
-10 ~ 50
℃
, less than 95% separately, please do not start cameras
beyond this range.
To avoid lightning strikes, please make sure the installation
of power supply ground line in a good condition.
To prevent the equipment from damage by shower or splash
of water, please do not place the device substances such as liquid.
