2
/
11
3) Triple click Z-Wave button on the circuit board (As shown on Fig.1) in 1.5 seconds, the LED will flicker
rapidly while exclusion process implement within 3 second.
Fig.1
2.3 Lighting code
Operation state
LED state
Power on
Flicker once
Network Inclusion/Exclusion
Flicker rapidly
Inclusion/Exclusion Success
Glow for 2 seconds
Inclusion/Exclusion Fail
Light off
2.4 Factory default
Smart Hidden Door Lock restores factory default automatically when the device is excluded.
Please use this procedure only when the network primary controller is missing or otherwise inoperable.
2.5 Z-Wave Plus Security
