3
/
11
Smart Hidden Door Lock is a security enabled Z-Wave Plus production, implements Z-Wave Application
Security Layer in accordance with Z-Wave protocol. The functionality and support command class is difference
when included as secure or no-secure node. The Door Lock command class and BASIC command class will
not support while door lock included in no-secure controller. Meanwhile, BASIC command class maps to Door
Lock Operation command class.
2.6 Association
By using association with SHDL, the SHDL may control another Z-Wave network device with and without
security transport, e.g. a Dimmer, Relay Switch, Roller Shutter, RGBW Controller, Wall Plug and another
SHDL.
NOTE:
Association allows for direct communication between Z-Wave network devices. Main controller does
not take part in such communication. Using this mechanism, SHDL may communicate with other devices even
when the main controller is damaged, e.g. in case of a fire.
SHDL supports 4 association groups. Each group supports associated 1 devices maximum.
Association Group 1 is assigned to sending SHDL lifeline status to associated devices, including send Door
Lock Operation report frame while SHDL unlocked and locked, send Battery level report frame while battery
level is change.
Association Group 2 is assigned to sending the Basic Set Off frame to associated device (e.g. another SHDL)
while the SHDL is unlocked and sending the Basic Set On frame to associated device while the SHDL is
locked with security transport if SHDL was added to network as security node or with non-security transport if
SHDL was added to network as non-security node.
Association Group 3 is assigned to sending the Basic Set On frame to associated devices with non-security
transport while the SHDL is unlocked.
Association Group 4 is assigned to sending the Basic Set Off frame to associated devices with non-security
transport while the SHDL is locked.
2.8 Z-Wave Function Limited
Due to SHDL only re-lock automatic while door close and detect by magnetic on the lock, so if Door
Lock receives either a Door Lock Operation Set (secure the door) or a Basic Set (0xFF) the command is
rejected and always fail in Application Reject Command reply and follow with current door lock status report.
2.9 Z-Wave support commands
Generic Deice Type = GENERIC_TYPE_ENTRY_CONTROL
Specific Device Type = SPECIFIC_TYPE_SECURE_KEYPAD_DOOR_LOCK
Support Command Class =
COMMAND_CLASS_ZWAVEPLUS_INFO,
COMMAND_CLASS_VERSION,
COMMAND_CLASS_MANUFACTURER_SPECIFIC,
COMMAND_CLASS_ASSOCIATION,
COMMAND_CLASS_ASSOCIATION_GRP_INFO,
