7
/
11
(Under this mode, the PIN is used for lock and unlock.)
4.6.3 Using C3 pin operation mode (For 6 digits virtue PIN only):
enter
#XXXX#18*
or
#SSSS#18*.
(Under this mode, the latch is unlocked as default, the latch will be locked with a vailed password, then
the password is become invalided immediately. The lock can only be unlocked with system PINs or
admin PINs.
4.6.4 Using Combination operation mode: (PIN and Smart Card):
Enable: enter
#XXXX#31*
or enter
#SSSS#31*
Disable: enter
#XXXX#32*
or enter
#SSSS#32*
(under this mode, the SHDL can be quickly access with system pin, admin pin and admin smart card;
otherwise, the lock will only be unlock with the user smart card along with the user pin at the same time)
4.6.5 The smart card access K1 mode: enter
#XXXX#61*
or
#SSSS#61*
(This is the default mode for Single smart card (either E card or F card) access.)
4.6.6 The smart card access K2 mode: enter
#XXXX#62*
or
#SSSS#62*
(A single smart card (E or F) need to either lock or unlock the SHDL.)
4.6.7 The smart card access K3 mode: enter
#XXXX#63*
or
#SSSS#63*
(Double card access mode, there are two card (Any one of F and E) needed at same time to unlock.)
4.6.8 The smart card access K4 mode: enter
#XXXX#64*
or
#SSSS#64*
(Any one of the F card and one of the E card need to be presented at same time, in order to unlock the
lock. But only one smart card need for the lock the SHDL. )
4.7 Adapt the max number of attempts allow for entering the PIN:
M1: enter
#SSSS#12 desired attempts
in two digits* M2: enter
#XXXX#12 desired attempts
in two digits*
(
the attempts allowed is between 00 to 99, when entering 00 indicate disable this particular function; Example,
for six attempts, enter #XXXX#1206*
)