4. Connecting the automatic valve with the Harmosol
Figure 4
A earthing
B black
C brown
D Blue or Grey
The Benisol has been cabled beforehand, but this grey cable is not yet connected to the
three-way-valve. In the picture above, you can find the instructions regarding the
connections. In this case, the warm water will be sent to the left. By switching the black and
brown wire, the warm water will be sent to the right. The little black connecting cap is not
used. The big grey cable connected to the Benisol contains 4 small cables : a grey one, black,
brown and yellow-green. Please connect them as shown in figure 5.
