67
BULL 1524
SAFETY MEASURES
• Do not stand within the gate movement area.
• Children must not play with controls and near the gate.
• In the event of malfunctions, do not attempt to repair the failure but contact the specialised personnel.
MANUAL AND EMERGENCY MANOEUVRE
In the event of power failure or malfunction, to manually operate the gate proceed as follows:
• After inserting the customized key C, turn it anti-clockwise and pull the lever L.
• The geared motor is unlocked and the gate can be moved by hand.
• To return to the normal operating mode, close the lever L again and manually activate the gate until it is geared.
MAINTENANCE
• Every month check the good operation of the emergency manual release.
• It is mandatory not to carry out extraordinary maintenance or repairs as accidents may be caused.These operations must be carried
out by qualified personnel only.
• Periodically check the efficiency of the safety devices and other parts of the system that could generate hazards due to wear and
tear.
• The operator is maintenance free but it is necessary to check periodically if the safety devices and the other components of the
automation system work properly. Wear and tear of some components could cause dangers.
• Keep the maintenance record that must be handed to you by the installer, and comply with the maintenance schedule.
• Unplug the system from the power source when servicing or cleaning the parts.
• Regularly check that all parts of the automation system are firmly secured and check for signs of wear or damage to cables, springs
and fastening screws. Do not use the automation system if the same requires repairs or maintenance.
WASTE DISPOSAL
As indicated by the symbol shown, it is forbidden to dispose this product as normal urban waste as some parts might
be harmful for environment and human health, if they are disposed of incorrectly. Therefore, the device should be dis-
posed in special collection platforms or given back to the reseller if a new and similar device is purchased. An incorrect
disposal of the device will result in fines applied to the user, as provided for by regulations in force.
USER’S HANDBOOK
C
L
Summary of Contents for BULL 1524
Page 2: ...2 A B 1 200 245 316 340 300 215 340 34mm BULL PI Optional 40 3 1 8 2 0 4 7 0 1 8 0 2 3 ...
Page 3: ...3 V Z R 4 7 B F T MIN 10 mm MAX 20 mm MIN 120 mm MAX 140 mm 5 6 R D R D ...
Page 5: ...5 12 13 14 C L 7 4 1 2 3 POWER 2 x 1 5 RG 58 5 4 x 0 25 4 6 5 2 x 0 25 3 x 0 25 15 ...
Page 9: ...9 22 DA BT6 ...
