To change the attachments, simply twist off the set that is attached to
the unit and twist on the desired set.
NOTE: Always ensure the appliance is set to ‘0’ before inserting the
plug into a mains outlet.
1. Plug the appliance into a 220 - 240V mains outlet and switch on
2. To start the massage, slide the power switch to the ‘1’ position for
low intensity or to the ‘2’ position for high intensity setting
3. Apply the massager head lightly to the area you wish to treat.
Move the unit slowly, holding it over the targeted area. Treat the
area for a short period of time and move to another area.
NEVER treat the same area for longer than 3 minutes
4. To turn the unit off, slide the power switch downwards to the ‘0’
position
PRODUCT FEATURES:
INSTRUCTIONS FOR USE:
4.
CHANGING ATTACHMENTS:
MASSAGE FUNCTION:
(1)
(3)
(2)
(4)
(1) Power cord. Comes complete with 2-prong plug
(2) Non-slip ergonomic handle
(3) Power switch: ‘0’=Off, ‘1’=Low intensity, ‘2’=High intensity
(4) Dual pivot heads
(5) Three sets of interchangeable heads
(5)
