- 8 -
Safety instructions
IMPORTANT:
Read all instructions and safety instructions in this manual before using
the device. Disregarding the instructions and safety instructions contained in this
manual or use them in any other manner as described below may result in damage to
the equipment or significant injury. This device may only be operated by persons who
have fully read and understood all instructions and safety instructions.
Do not exceed the maximum load current of 16 A (approx. 3680 W). Make sure the
connected devices are connected securely and properly to the device connection of
the timer. Check the device for any signs of damage before use. Do not use the device
if it is damaged or shows signs of damage (for example after a fall or a harder kick).
Do not drop the device or push the device. Avoid vibrations near the device. Avoid
contact with line voltages. Never attempt to open the device for repairs or modifications
of the device. The device is only voltage-free when the plug is unplugged. If the
device is connected to a power circuit, disconnect it from it when not in use or during
a thunderstorm. Do not short-circuit the device. Use the device for indoor use only.
Keep the device away from fire. Keep the device away from children and people with
mental disabilities. Ensure adequate air circulation at the place of use of the device. Do
not store or operate the device near heat sources or in a humid environment. Do not
operate the device in the event of high temperature fluctuations. Clean the device only
with a damp cloth and avoid the ingress of water or other liquids. Do not use chemical
cleaners to clean the device. Dispose of all parts of this device in accordance with local
environmental regulations and not with normal household waste. The device is not
approved for commercial use.
