17
Initial Settings
The language & date/time needs to be set if and when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an
extended period of time.
1. Press the
ON/OFF
button to turn the power on.
2. Press any button to enter language setup.
Select the displayed language with the
W
/
X
/
S
/
T
buttons and press the
SET
button.
3. Select the date format with the
S
/
T
buttons, and press the
SET
button.
4. Select the item’s field with the
W
/
X
buttons and adjust the value for the date and
time with the
S
/
T
buttons.
5. After confirming all settings are correct, press the
SET
button.
Press the
MENU
button will enter capture mode with saving the settings.
Setting the Date and Time
When the date and time information is not displayed on the LCD monitor, follow these
steps to set the correct date and time.
1. Press the
MODE
button, and set the camera
mode to [
] or [
]; or press the
button.
2. Press the
MENU
button.
3. Select the [Setup] at the end of the Menu with the
S
/
T
buttons, and press the
SET
button.
4. Select [Date/Time] with the
S
/
T
buttons, and
press the
SET
button.
5. Select the date format with the
S
/
T
buttons, and
press the
SET
button.
Select the item’s field with the
W
/
X
buttons
and adjust the value for the date and time with
the
S
/
T
buttons.
The time is displayed in 24-hour format.
After confirming all settings are correct, press
the
SET
button.
6. To exit from the [Setup] menu, press the
MENU
button.
MENU
SET
;
;
MENU
SET
;
;
AE250 UM EN.book Page 17 Thursday, April 26, 2012 11:12 AM
Downloaded From camera-usermanual.com BenQ Manuals