23
Taking a Panoramic Picture
Pictures are manually shot, and the camera
automatically combines pictures in the camera.
1. Press the
MODE
button, and set the camera
mode to [
], and press the
SET
button.
2. Select [Panorama Video] with the
W
/
X
/
S
/
T
buttons, and press the
SET
button.
3. Press the shutter button down fully.
4. Steady and slowly move your camera horizontally
to select the photographic direction (either left or
right), the camera will start recording
automatically.
5. While you are moving the camera, a status bar
appears to show the current recording progress.
When the status bar reaches its end, recording
will automatically stop and the pictures are
automatically combined into a panoramic picture.
While recording, you can press the shutter button anytime to stop recording.
And
the pictures are automatically combined.
To stop recording manually, you must wait for the status bar to reach at least 40
percent of the whole progress in order to get a successful panoramic picture.
Panoramic pictures shooting may not be available in the following situations.
a. When shooting has not finished after a certain period of time.
b. When the camera movement speed is too fast.
c. When the camera is not straight relative to the panorama direction.
Setting the Lomo
Creates a Lomo-like effect by adding over saturated colors, dark corners, and so on.
1. Press the
MODE
button, and set the camera mode to [
], and press the
SET
button.
2. Select [Lomo] with the
W
/
X
/
S
/
T
buttons, and press the
SET
button.
3. Press the
W
button to select the desired option item with the
W
/
X
buttons and
press the
SET
button.
Lomo 1: Creates a typical Lomo effect.
Lomo 2: Creates a retro Lomo effect (more sepia tone).
Lomo 3: Creates a retro Lomo effect (greener tone).
Lomo 4: Creates a vivid Lomo effect.
Lomo 5: Creates a retro Lomo effect (black and white tone).
00214
00214
00214
SCN
SCN
AE250 UM EN.book Page 23 Thursday, April 26, 2012 11:12 AM
Downloaded From camera-usermanual.com BenQ Manuals
