Benq Wireless LAN
AWL100 PCMCIA Adapter User Manual
5
2.1 Status
State
The current state of the driver is displayed in this field. If the state reveals
“Associated,“ it means that the normal flow of operation is in Infrastructure mode.
This shows that the PC is already connected to access point and BSSID is also shown
in the form of hex digits. At the same time, the networking is available for the device.
In “Scanning ” state, it means that the node can not detect the SSID to get an access
point within range and is searching for an available access point. Also, if the driver
failed to initialize for some unknown reasons, this field will display an error message.
Rescan
The driver will restart and begin its Connection Procedure if the rescan button is
pressed. In general, the connection procedure will be different according to the Mode
of the driver.
Enable / Disable Radio
This button is used to enable or disable the radio of AWL100
