Preparing the camera for use 3
Eng
lish
Preparing the camera for use
Use only the specified batteries for the camera, and always turn off the camera before
removing the batteries.
Using multifunctional buttons
You can choose camera settings by pressing the 4-way control or the
button.
1.
Left/Focus
:
• Scrolls left in menus.
• Toggles between different focus modes.
2.
Up
:
• Scrolls up in menus.
• Turns on/off Face Tracking. See "Face Tracking" on page
9 for details.
• Rotates an image. See "Rotating an image" on page 25
for details.
3.
Right/Flash
:
• Scrolls right in menus.
• Selects a flash mode.
4.
Down
:
• Scrolls down in menus.
5.
: Confirms a chosen setting.
A
To install the batteries:
1. Open the battery cover (A).
2. Insert the batteries in the correct direction by
matching the + - label on the battery cover (B).
3. Push the batteries all the way down.
4. Close the battery cover (D).
B
C
To remove the batteries:
1. Open the battery cover.
2. Pull the batteries out (C).
3. Close the battery cover (D).
D
C103X_C123X_UM - EN.book Page 3 Tuesday, August 4, 2009 11:51 AM