Preparing the camera for use 3
Eng
lish
Charging the battery
The battery charge status affects the camera performance. To maximize the performance
and the battery life, fully charge the battery using the specified charger and AC power
adapter, and then fully discharge it through normal use at least once.
Using touch screen and buttons
You can use the attached stylus or your finger (may cause fingerprints on the screen tough)
to select options available from the touch screen. Yet, some operations must work with
buttons (such as MENU
and Play
). So, this user manual uses “tap” when
referring to touch screen actions and “press” when referring to button actions.
C
To remove the battery:
1. Open the battery/SD card cover.
2. Release the battery lock lever.
3. When the battery has come out a little, gently pull it
out the rest of the way.
4. Close the battery/SD card cover.
D
To charge the battery:
1. Insert the battery into the charger.
2. Connect one end of the AC power adapter to the
charger.
3. Connect the other end of the AC power adapter to a
wall outlet.
4. When the battery is being charged, the charger LED
indicator lights up in red. When the battery is fully
charged, it turns into green.
• Damage caused by the use of an incorrect charger set is not covered under the
warranty.
• The battery may be warm after being charged or used. This is normal and not a
malfunction.
• When using the camera in a cold environment, keep the camera and its battery warm
by holding it inside your jacket or another warm protective environment.
T700 UM.book Page 3 Wednesday, May 23, 2007 11:36 AM