37
Initializing the DVD Recorder
Eng
lish
8. The ’
Decoder
’ item will be highlighted automatically. Some TV channels send coded TV
signals that can only be viewed properly with a purchased or rented decoder. You can
connect such a decoder (descrambler) to your DVD Recorder. Press the
OK
button
and toggle the following options using the
Up
or
Down
button:
On
: select this item if a decoder is used
Off
: select this item if no decoder is used
Press the
OK
button to confirm your selection and
continue.
9. Press the
Down
button to highlight ’
NICAM
’ and
then press the
OK
button. Toggle the following
options using the
Up
or
Down
button:
On
: select this item if NICAM is supported by your local TV/
CATV broadcasting system
Off
: select this item if NICAM is not supported by your local TV/
CATV broadcasting system
Press the
OK
button to confirm your selection and
continue.
10. (Optional) Press the
Down
button to highlight
’
Fine Tuning
’ and then press the
OK
button. Fine-
tune the signal reception using the
Left
or
Right
button until you get a clear image on the screen.
11. Press the
Setup
button to save settings and close the
menu.