39
Initializing the DVD Recorder
Eng
lish
Setting the ’Setup’ clock
The ’Setup’ clock is used by the DVD Recorder when it saves video files onto DVD, and for
determining timer functions. The time is also displayed on the front panel when the DVD
Recorder is in standby mode (after initialization).
Should you need to manually alter the ’Setup’ clock, you can use the numbered buttons on the
remote control to enter the time and date directly into the DVD Recorder.
1. Press the
Setup
button on the remote control to
launch the ’SETUP’ menu.
2. Press the
Up
or
Down
button to select
’
Setup
’.
3. Press the
Right
button, and then press the
Up
or
Down
button to select ’
Time &
Date
’.
4. Refer to "Setting Time and Date" on page 32 for
information about how to set the time and date.