80 Managing
recordings
En
gli
sh
Disc Settings
The disc settings screen displays above the first title in the disc play list and contains general
information about the current disc.
You can:
• give the disc a name
• finish editing (make edits DVD player compatible) for DVD+RW only;
• finalize a disc (for DVD+R disc only, so that you can play the disc on general DVD players);
• enable or disable write protection on the disc;
• erase all content on a DVD+RW.
Editing disc name
1. While playing a suitable unprotected and
unfinalized recordable DVD+RW type disc, press
the
Play list/menu
button on the remote
control to display the disc content menu.
2. Press the
Up
button to highlight the first
title in the disc content menu.
3. Press the
Up
button again. The Disc
information menu will display on-screen.
4. Press the
Right
button to enter the Disc setting
menu.
5. With the ’
Name
’ item highlighted, press the
OK
button.
6. To enter a character, press the
Up
or
Down
button until the desired character displays
on-screen. To toggle between upper and lower case
characters, press the
Select
button. To start
entering the next character, press the
Right
button.
7. Repeat step 6 to enter more characters.
Note:
You can enter up to 18 characters.
8. Press the
OK
button to confirm.
