Using BIOS setup
34
•
System Time:
allows you to set the time of the system. Use
+
or
-
to change the value.
•
System Date:
allows you to set the date of the system. Use
+
or
-
to change the value.
Advanced menu
The
Advanced
menu contains advanced settings of the system.
•
Video Configuration
: determines the memory size that can
be used by the Internal Graphic Device.
•
Power save
: allows you to decide the functions and devices
that would be enabled and disabled when
Power Save
mode
is activated. For details, refer to
"Saving power of your Joybook
Lite" on page 5
.
•
HDD/SSD
: allows you to disable the installed hard drive or
SSD in order to save power.
•
Quick Charge
: allows you to complete the battery charge
within a short time.
Security menu
The
Security
menu contains the security settings, which
safeguard your system against unauthorized use.
•
Set Supervisor Password:
This set of password controls the
system supervisor's access to the whole BIOS setup utility. It
must be set before
User Password
can be set. When typing
the password, first make sure Num Lock is off, and then type
your password in the entry field and press <Enter>. Confirm
your password by typing it again and pressing <Enter>.
•
Set User Password:
This set of password controls the user's
access to the BIOS setup utility. When typing the password,
first make sure Num Lock is off, and then type your password
in the entry field and press <Enter>. Confirm your password
by typing it again and pressing <Enter>.
Boot menu
The
Boot
menu contains the boot configuration settings of the
system.
If you are not familiar with the items in the
Advanced
menu,
you are advised to keep the default. Setting values incorrectly
may cause system malformation.
• If you intend to disable the hard drive or SSD, note that all
programs installed and data stored on the disabled drive will
not be available. You may not boot into Windows operating
system accordingly.
• Quick charge may cause damage to your battery and affect
battery life. Yet the length of charging time and the battery
life may vary as the battery declines in capacity over time.
Do NOT set the BIOS security password without having
memorized it or written it down and stored it with your Joybook
Lite warranty documentation. Should you happen to forget or
mislay the password once set, you will be greatly
inconvenienced in gaining subsequent access to your
Joybook Lite.
If
Supervisor Password
and
User Password
are both set,
you can enter either one of them during the password prompt.
To have full privileges in BIOS setup, enter
Supervisor
Password
.
Summary of Contents for DH1200
Page 1: ...Joybook Lite U121 Eco Series User Manual...
Page 68: ...Appendix 64 Memo...
