background image

Other settings  21

Eng

lish

To select a Movie Record option:

1. Slide the mode switch to 

 and enter the 

Movie Record

 mode.

2. Press 

, and then select an option.

3. Press 

 or 

 to select a setting.

4. Press 

 to confirm setting.

Battery status

Other settings

Press 

 > 

, and then select an option.

Effect: Normal, Vivid, Sepia, B&W, Vivid Red, Vivid Green, Vivid Blue. 
See "Effect" on page 14 for more details.

Icon

Description

Battery power is full.

Battery power remains adequate.

 

Battery power is low.

Battery power is very low. You should replace the battery ASAP.

Option

Description

Sounds

[Startup]

Sets a type of the startup sound.

[Shutter]

Sets the shutter sound on and off.

[Operation]

Sets the operation sound on and off.

[Volume]

Adjusts the volume of the shutter sound, startup 
sound, operation sound and playback sound.

Power Saving

 [1 min.]

For power conservation, the camera automatically 
enters the standby mode after it has been idle for 
a period of time. (Press any key to resume.)

 [3 min.]

 [5 min.]

 [Off]

The camera remains on when idle.

E1250_E1280_UM - EN.book  Page 21  Friday, February 5, 2010  4:44 PM

Summary of Contents for E1250 Series











































Reviews: