Touring the camera 19
Engli
sh
4. Close the battery/card cover and then slide it
to the right to lock it in place.
To remove the battery:
1. Slide the battery/card cover to the left to release and open it.
2. Push the battery latch to the left to release
the battery and remove it from the battery
slot.
3. Close the battery/card cover and then slide it to the right to lock it in place.
• Turn off the camera before removing the battery.
• Use only the specified battery type. Using other battery type may damage the
camera and invalidate the warranty.
• Ensure that the battery is inserted into the product with correct polarity.
Incorrect polarity may damage the camera or cause fire.
• Download all pictures and remove the battery from the camera if you are going to
store the camera for a long time.
• The battery may be warm after being used. This is normal and not a malfunction.
• When using the camera in a cold environment, keep the camera and its battery
warm by holding it inside your jacket or another warm protective environment.
G1 UM - Without Safety Reg - EN.book Page 19 Wednesday, June 13, 2012 10:39 AM