More on the playback mode 65
Engli
sh
Setting startup image
You can customize the startup image. This image is displayed on the screen
every time you turn on the camera.
1. Press
to switch to
Playback
mode.
2. Press
>
>
Startup Image
.
3. Press
or to enter the submenu.
4. Use the wheel dial or press
or to
select the setting:
•
Default
: uses the default startup image.
•
My Photo
: sets one of your captured image
as the startup image. Press
or to
select the image that you want to use.
•
Off
: disables this feature.
5. Press
to confirm.
Setting DPOF
The Digital Print Order Format (DPOF) setting allows you to select images on
the memory card for printing and specify the number of print copies in advance
using the camera. This is extremely convenient for sending the images to a
photo developing service or for printing on a direct print function compatible
printer.
To set up DPOF on a single file:
1. Press
to switch to
Playback
mode.
2. Press
>
>
DPOF
.
3. Press
or to enter the submenu.
4. Use the wheel dial or press
or to
select
Single
and press
.
5. Press
or to select the files that you
want to mark for printing.
6. Use the wheel dial or press
or to specify the number of copies.
7. Press
to confirm the setting.
Slide the Zoom lever to
to select whether you want to print the date stamp.
Startup Image
Default
My Photo
Off
DPOF Single
2/153
00
Date Stamp On
OK
OK
G1 UM - Without Safety Reg - EN.book Page 65 Wednesday, June 13, 2012 10:39 AM