45
Web management
You can choose the available frequencies for the Host’s Wi-Fi signal in the
2.4G Enable
and
5G
Enable
fields. A 2.4G Wi-Fi signal is a signal that features a larger coverage range but slower data
speeds and is more commonly used by older mobile devices, while a 5G Wi-Fi signal features faster
data speeds at a smaller range. To enable or disable either 2.4G or 5G Wi-Fi signals by selecting
Enable
or
Disable
in the
2.4G Enable
and/or
5G Enable
fields.
After you configure all the
Wireless Network
>
Setting
items, press
Apply
to proceed.
Wi-Fi Radio Setup
In the
Transmission Power
field you can set the strength of the Wi-Fi signal with the available
options being of
Heavy
for a strong Wi-Fi signal (20 dbm for 2.4G; 15 dbm for 5G),
Standard
for a
standard Wi-Fi signal (18 dbm for 2.4G; 12 dbm for 5G), and
ECO
(15 dbm for 2.4G; 10 dbm for
5G) for a weaker, energy saving signal.
• Certain mobile devices are unable to access 5G Wi-Fi signals due to hardware limitations. If your mobile device
is unable to connect to the Host via Wi-Fi, select
Enable
in the
2.4G Enable
field.
• Both
2.4G Enable
and
5G Enable
can be enabled at the same time.
