Replacing the memory
44
Replacing the memory
You can replace the existing memory module with a higher-
capacity one. Before you upgrade or replace memory, please
check on the BenQ web site to determine the module which can
be used, or contact BenQ distributor or customer service center.
It is recommended that you take your Joybook Lite to the BenQ
distributor or customer service center for the upgrade or
memory replacement.
For details about the limit of maximum memory, refer to the
product information from
1. Shut down your Joybook Lite completely. Disconnect the
power adapter and turn over your Joybook Lite.
2. Slide “Battery retainer B” to the right to unlock the battery.
To find out the types of BenQ certified memory modules for
your Joybook Lite, try the steps below:
1. Connect to BenQ Online Service and Support
).
2. Click
Knowledge Base
.
The website layout and content may vary by region/country.
• If you install an uncertified memory module, your system may
not work properly.
• It is the sole responsibility of the user if problems (such as
data loss and system failure) occurred due to non-factory
installed software, parts, and/or non-original accessories.
Back
cover
Battery
Battery
retainer B
JBL_T132_UM EN.book Page 44 Wednesday, October 7, 2009 11:32 AM