Installing additional memory
64
3. Slide "Battery retainer A" to the unlock
position (1) and,
while still holding the retainer, pull the battery away from its
compartment (2).
4. The memory cover is secured with two screws. Use a
screwdriver to remove these screws.
5. Remove the memory cover.
• Ground yourself to your Joybook with professional grounding
equipment like an anti-static wristband, or touch the metal
surface on the inside of your Joybook to discharge any static
electricity.
• Handle the memory module by its edge and avoid touching the
contacts.
6. Align the memory module with the slot, and then insert it.
When inserting, pay attention to the direction of the memory
module.
Battery retainer A
JB_Q41_en.book Page 64 Friday, December 21, 2007 12:09 PM
