6
RS232 via LAN
Settings
1.
Find the Wired LAN IP address of the connected projector from the OSD menu and make sure the
projector and the computer are within the same network.
2.
Input
8000
in the
TCP port #
field.
RS232 via HDBaseT
Settings
1.
Determine the COM Port name used for the RS232 communications in
Device Manager
.
2.
Choose
Serial
and the corresponding COM port as the communication port. In this given example,
COM6 is selected.
PC or laptop
RJ45 port on a projector
LAN cable
PC or laptop
HDBaseT compatible device
D-Sub 9 pin
RJ45
RJ45 port on a projector
LAN cable
D-Sub 9 pin