Operation
40
Remote paging operations
Connect the projector to your PC or notebook with a USB cable prior to using the paging
function. See
"Connection" on page 21
for details.
You can operate your display software program (on a connected PC) which responds to
page up/down commands (like Microsoft PowerPoint) by pressing
PAGE +/PAGE -
on the
remote control.
If remote paging function doesn't work, check if the USB connection is correctly made and
the mouse driver on your computer is updated to the latest version.
The remote paging function cannot work with Microsoft
®
Windows
®
98 operating system.
Windows
®
XP or higher operating systems are recommended.
Freezing the image
Press
FREEZE
on the remote control to freeze the image. The word '
FREEZE
' will
appear on the screen.
To release the function, press any key on the projector or remote
control.
If your remote control has the following keys, please note that they cannot be pressed to
release the function:
LASER
,
#2
,
#5
,
PAGE +/PAGE
-.
Even if an image is frozen on the screen, the pictures are running on the video or other
device. If the connected devices have active audio output, you will still hear the audio even
though the image is frozen on screen.
Hiding the image
In order to draw the audience's full attention to the presenter, you can use
ECO BLANK
on the projector or
ECO BLANK
on the remote control to hide the screen image.
When the function is activated with an audio input connected, the audio can still heard.
You can set the blank time in the
System Setup: Basic > Operating Settings >
Blank Timer
menu
to let the projector return the image automatically after a period of
time when there is no action taken on the blank screen. The length of time can be set from
5 to 30 minutes in 5-minute increments.
If the preset time spans are not suitable for your presentation, select
Disable
.
No matter
Blank Timer
is activated or disabled, you can press most of the keys on the
projector or remote control to restore the picture.
•
Do not block the projection lens from projecting as this could cause the blocking object to
become heated and deformed or even cause a fire.
