Operation
41
Function
Description
Operation
Settings
Direct Power On
Allows the projector to turn on automatically once the power is fed
through the power cord.
Signal Power On
Sets whether to turn the projector directly on without pressing the
POWER key on the projector when the projector is in standby mode
and the signal is feed through the VGA cable.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See
"Setting Auto Power Off " on page
for details.
Quick Cooling
Enables or disables the Quick Cooling function. Selecting On enables
the function and projector cooling time will be shortened from a normal
90-second duration to approximately 30 seconds.
This function is only available when Instant Restart is off.
Instant Restart
Selecting On enables you to restart the projector immediately within 90
seconds after turning it off.
This function is only available when Quick Cooling is off.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a value between 30
minutes and 12 hours.
Panel Key
Lock
Disables or enables all panel key functions except
POWER on the
projector and keys on the remote control. See
for details.
Background
Color
Sets the background color for the projector.
Splash
Screen
Allows you to select which logo screen will display during projector
start-up. The following options are available: BenQ logo, My Screen,
Black screen, Blue screen.
My Screen
Captures and stores the projected picture as My Screen. See
your own startup screen" on page 32
for details.
In the unlikely event that the capturing action fails, change your
target picture.
4. SYSTEM SETUP: Basic
menu
