Operation
23
Securing the projector
Using a security cable lock
The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a lock,
such as the Kensington lock, to secure the projector. You can locate a Kensington lock slot on
the rear side of the projector. See item 24 on page
9
for details.
A Kensington security cable lock is usually a combination of key(s) and the lock. Refer to the
lock’s documentation for finding out how to use it.
Utilizing the password function
For security purposes and to help prevent unauthorized use, the projector includes an
option for setting up password security. The password can be set through the On-Screen
Display (OSD) menu.
WARNING: You will be inconvenienced if you activate the password functionality and
subsequently forget the password. Print out this manual (if necessary) and write the password
you used in this manual, and keep the manual in a safe place for later recall.
Setting a password
Once a password has been set and the power on lock is activated, the projector cannot be
used unless the correct password is entered every time the projector is started.
1.
Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security Settings
menu. Press MODE/ENTER. The Security Settings page displays.
2.
Highlight Change Security Settings and press MODE/ENTER.
3.
As pictured to the right, the four arrow keys ( ,
, ,
) respectively represent 4 digits (1, 2,
3, 4). According to the password you desire to set,
press the arrow keys or the numeric buttons "1"
to "4" on the remote control to enter six digits for
the password.
4.
Confirm the new password by re-entering the
new password.
Once the password is set, the OSD menu returns
to the Security Settings page.
5.
To activate the Power On Lock function, press / to highlight Power On Lock and
press
/
to select On.
6.
To activate the Splash Screen Lock function, press / to highlight Splash Screen
Lock and press
/
to select On.
When the Splash Screen Lock is activated, the MyScreen function in the SYSTEM
SETUP: Basic menu will be password-protected.
IMPORTANT: The digits being input will display as asterisks on-screen. Write your selected
password down here in this manual in advance or right after the password is entered so that it
is available to you should you ever forget it.
Password: __ __ __ __ __ __
Keep this manual in a safe place.
7.
To leave the OSD menu, press MENU/EXIT.
INPUT NEW PASSWORD
Back
MENU
Power On Lock and Splash Screen Lock
use the same password.
