Operation
48
•
The Q Presenter only accepts up to 8 characters consisting of English capitalized
letters and digits 0-9 for the name, full 6 digits consisting of 1 to 4 for the
password.
•
To change the Q Presenter interface language, click the down arrow to reveal a
drop-down list and select a desired language. Click Apply.
•
To allow notification messages to appear, click Yes. Click Apply.
•
To display your computer screen on multiple projectors, click Activate 1:N
Display. Click Apply. It can display up to 8 projectors at the same time.
4.
The Advanced Settings page allows you to configure Q Presenter.
•
To display still pictures, click the down arrow to reveal a drop-down list and
select Graphic. Click Apply. To display video clips, click the down arrow to reveal
a drop-down list and select Video. Click Apply.
Graphic mode: worse image quality but faster transmission speed.
Video mode: better image quality but slower transmission speed.
However, the actual transmission speed was determined by the network traffic at
that time.
•
To adjust the capture rate, move the slide bar. The network bandwidth may also
affect the performance.
•
To launch Q Presenter when your computer operating system is started, click Yes
for Boot and launch. Click Apply.
•
To link to the Projector Network Display System web page, click Link.
5.
Disconnect
To disconnect from the projector(s), click the Disconnect icon.
•
Be sure to turn off other virtual network control programs before using Q Presenter.
•
Firewall in the PC must be switched off to allow Q Presenter and USB Display to work.
•
Wireless keyboard mouse combo is not supported by Pixelworks currently.
