Operation
39
Press
MODE/ENTER
. A confirmation message displays.
2.
Highlight
Yes
and press
MODE/ENTER
to confirm. You will see the message
“Timer is Off!” displaying on the screen.
How to use the Timer On key?
Timer On
is a multi-functional key.
• If the presentation timer is off, pressing this key
displays a confirmation message. You can decide
whether to activate the timer or not by
following the on-screen instruction.
• If the timer is already on, pressing this key
displays a confirmation message. You can decide
whether to restart, continue or turn off the
timer by following the on-screen instruction.
Remote paging operations
Connect the projector to your PC or notebook
with a USB cable prior to using the paging function.
You can operate your display software program (on
a connected PC) which responds to page up/down
commands (like Microsoft PowerPoint) by pressing
Page Up/Down
on the remote control.
If remote paging function doesn't work, check if the
USB connection is correctly made and the mouse
driver on your computer is updated to the latest
version.
Hiding the image
Press the
ECO BLANK
button from projector or
remote control to turn off the image for a period of
time with up to 70% lamp power saving. Press any
key on the projector or remote control to restore
the image. The word "
ECO BLANK
" appears at
the screen while the image is hidden. When this
function is activated with an audio input con-
nected,the audio can still be heard.
You can set the blank time in the
SYSTEM SETUP: Basic > Operation Settings >
Blank Timer
menu
to let the projector return the image automatically after a period of
time when there is no action taken on the blank screen. The length of time can be set from
5 to 30 minutes in 5-minute increments.
•
Do not block the projection lens from projecting as this could cause the blocking object to
become heated.
•
No matter Blank Timer is activated or not, you can press any key (except the
Page Up/
Down
key) on the projector or remote control to restore the picture.
