2013/7/25
19
Chapter 6 Certification
Chapter 6 Certification
Chapter 6 Certification
Chapter 6 Certificationssss
6.1 IEC Certification
The PV modules provided by BenQ Solar all pass the design qualification and type
approval standard IEC 61215 edition 2.
The PV modules provided by BenQ Solar all pass the safety qualification standard IEC
61730 certified for application class A.
Modules qualified for safety through EN IEC61730.1 and EN IEC61730.2 within this
application class are considered to meet the requirements for Safety Class II.
6.2 ETL Certification
This product meets or exceeds the requirements set forth by UL1703 for PV Modules.
This UL1703 Standard covers flat-plate PV modules intended for installation on buildings
and those intended to be freestanding.
To satisfy the listing for this product the modules must be mounted with a rack or
standoff structure.
It does not include integration into a building surface because additional requirements
may apply.
This product is not intended for use where artificially concentrated sunlight is applied to
the module.
BenQ Solar is a division of AU Optronics
© Copyright AUO Optronics Corp. All rights reserved. AUO reserves the right to update, delete or modify
the information at any time without prior notification. All modifications and amendments shall be effective
immediately.
