30 Menu
operation
Advanced menu
Picture
Picture Mode
The projector is preset with several predefined picture modes so that you can
choose one to suit your operating environment and input signal picture type.
•
Bright
: Maximizes the brightness of the projected image. This mode is suitable
for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
•
Vivid TV
: Being slightly brighter than
Cinema
mode, it is suitable for playing
movies in rooms where there is a small amount of ambient light, eg. your living
room.
•
Cinema
: With well-balanced color saturation and contrast with a low brightness
level, this is most suitable for enjoying movies in a totally dark environment (as you
would find in a commercial cinema).
•
Sport
: This mode is best for watching sporting events in rooms where is a small
amount of ambient light, et. your living room.
•
Game
: This mode is best for playing video games in rooms where there is a small
amount of ambient light, eg. your living room.
•
User 1
/
User 2
: Recalls the settings customized based on the current available
picture modes. See
User Mode Management on page 30
.
User Mode
Management
There are 2 user-definable modes if the current available picture modes are not
suitable for your need. You can use one of the picture modes (except the
User
1/User 2
) as a starting point and customize the settings.
1. Go to
Picture
>
Picture Mode
.
2. Press / to select
User 1
or
User 2
.
3. Press
to highlight
User Mode Management
and press
OK
.
4. Highlight
Load Settings From
and press
OK
.
5. Press
to select a picture mode that is close to your need.
6. When done, press
OK
and
BACK
to return to the
Picture
menu.
7. Press to select other submenus you want to make changes and use / to
adjust the values. The adjustments define the selected user mode.
•
Rename User Mode
Select to rename the customized picture modes (
User 1
or
User 2
).
1. Go to the
Picture
>
Picture Mode
menu, select
User 1
or
User 2
.
2. Press
to select
User Mode Management
.
3. On the
User Mode Management
window, select
Rename User Mode
and
press
OK
.
4. On the
Rename User Mode
window, use / / / to select desired
characters for the selected mode.
5. When done, press
OK
and
BACK
to exit.
Brightness
The higher the value, the brighter the image. Adjust this control so the black areas
of the image appear just as black and that detail in the dark areas is visible.
