(B)OUTDOOR UNIT
As condensing temperature rises,evaporating temperature rises and cooling capactlydrops.In order
to achieve maximum cooling capacity,the location selected for outdoor unit should fulfill the following
requirements:
•Install the condensing (outdoor)unit in away such that hot air distributed by the outdoor condensing
unit cannot be drawn in again (as in the case of short circuit of hot discharge air).Allow sufficient
space for maintenance around the unit.
•Ensure that there is no obstruction of air flow into or out of the unit.Remove obstacles which block
air intake or discharge.
•The location must be well ventilated,so that the unit can draw in and distribute plenty of air thus
lowering the condensing temperature.
•A place capable of bearing the weight of the outdoor unit and isolating noise and vibration.
•A place protected from direct sunlight
high rise buildings and ambients above 48`C
.Otherwise
use an awning for protection,if necessary
(300mm clearnce r
e
quired above the unit)
.
1
5
INSTALLATION CLEARANCE
•Outdoor units must be installed such that there is no short circuit of the hot discharge air or
obstruction to smooth air flow.
We recommend the units be installed 0ne meter above ground level
were practicable.
CAUTION
：
If the condensing unit is operated in an atmosphere containing
chemicals near industrial
areas, high
salt(coastal area)
or near bore water
,
such substances
shorten the life time
o
f the unit
due to corrosion
.
ALL MODELS
Minimum Distance
1000mm
300mm
300mm
500mm
A
A
B
B
C
C
D
D
Summary of Contents for BENDX ACHW 34
