Benstone Fieldpaq User Manual Download

Page: 23 / 222

Open Data

: Selecting Open Data to open a saved data file as well as the

associated setup parameters. It will display another window.

Open:

Opens the file you have highlighted.

Edit:

Selecting edit will open up another menu

of:

Cut, Copy, Paste, Delete, New Folder,

Rename, Select All, Unselect

. Select what

you wish to do via the

[

Navigation Keypad

] and

press [

]. If you rename

the folder, then you will need

to use the alpha-numeric

keypad and enter the correct

name. When complete,

press [

]. Another feature

is that you can move the

cursor to the Name box: and

press [

]. This action will

allow you to directly enter the

file name via the keypad.

: Selecting View allows you to arrange the icons by

Name, Type, Size

, or

Date

. After you have selected the way you wish to view the file icons, select

Refresh and then press

[OK].

The Icons will then be sorted in the display

according to

Name, Type, Size, or Date.

Save Data (F1):

When saving your test data into a data file .fd2, the Fieldpaq will automatically

assign a numerical file name. You can use the assigned file name, or choose

“edit” to rename it. You may also assign a different folder for saving the new file.

The file name begins with 0000.fd2, and then 0001.fd2 etc. If a numerical file

already exists, the system will assign a new numerical file name that is larger than

the existing file name. For example, if there are already two files which are

named as 0024.fd2 and 0128.fd2, then the system will assign a file name 0129.fd2

for the new file.

Your Fieldpaq also has a quick save feature. Simply press the [

soft key

] 1 twice.

Summary of Contents for Fieldpaq































































































































































































































Search results

Summary of Contents for Fieldpaq

Reviews:

Related manuals for Fieldpaq

Brands by name

Popular brands

Benstone Fieldpaq, User Manual

Search results

Summary of Contents for Fieldpaq

Reviews:

Related manuals for Fieldpaq

Brands by name

Popular brands